This piece was made with over 3,000 pieces of wood that includes cherry, maple, peruvian walnut, yellowheart, spectra ply and black veneer.

It measures 12-1/2" diameter X 6-1/4" tall. The finish consists of several coats of sanding sealer and ten coats of General Finishes Wood Turners Finish sanded and buffed to a high gloss.

Segmented form consisting of  884 pieces of wood that include cherry, mahogany, wenge,yellowheart and black veneer. The piece was finished with four coats of gloss poly then 4 coats of satin. Wet sanded and buffed to a super smooth finish. The piece is 11-1/4" diameter X 9" tall.

This is an open segmented piece with 1,015 pieces. Woods used are Bubinga, Maple, Yellowheart and Wenge. The piece is finished with semi gloss lacquer. You definitely do not want a tool catch. 8" diameter X 10" tall

This cremation urn was crafted for a lost friend using black walnut, ambrosia maple, rainbow poplar, sycamore, and spalted maple.

Mini Segmented Bat, made with 218 pieces. Woods used in this project are Walnut, Maple, & Paduak. Finished with Arm-R-Seal Oil & Urethane Topcoat. 

The piece has 5 coats of sand and sealer. 

It was sanded between coats with 00 steel wool. Then 3 coats of wipe on poly. 

Sanded to 600 grit. Applied sand and sealer. 

5 coats in between coats sanded with 00

 grit steel wool. Then applied 3 coats of wipe

on poly.